How To Install A Vanity And Sink

Installing a vanity and sink is a great way to update your bathroom without breaking the bank. It’s a relatively simple project that can be completed in a weekend. Here are the steps on how to install a vanity and sink:

1. Remove the old vanity and sink

Start by turning off the water supply to the vanity. Then, disconnect the drain and water lines. Once the vanity is disconnected, carefully remove it from the bathroom. Be sure to have a helper to assist you, as vanities can be heavy.

2. Install the new vanity

Place the new vanity in the desired location. Use a level to make sure that it is level. Once the vanity is level, secure it to the wall with screws. Be sure to use the appropriate screws for the type of wall you have.

3. Install the sink

Place the sink on top of the vanity. Be sure to center the sink and make sure that it is level. Once the sink is level, secure it to the vanity with screws. Again, be sure to use the appropriate screws for the type of sink you have.

4. Connect the drain and water lines

Connect the drain line to the sink. Be sure to use a washer to create a watertight seal. Once the drain line is connected, connect the water lines to the sink. Be sure to use Teflon tape on the threads of the water lines to create a watertight seal.

5. Turn on the water supply and check for leaks

Once the drain and water lines are connected, turn on the water supply and check for leaks. If you find any leaks, tighten the connections until the leaks stop.

6. Install the faucet

The last step is to install the faucet. Place the faucet on the sink and secure it with the included nuts and bolts. Be sure to use a washer to create a watertight seal.

Once the faucet is installed, your new vanity and sink are complete. Enjoy your new bathroom!