Change Pedestal Sink To Vanity

Upgrading a pedestal sink to a vanity is a practical and stylish renovation that adds storage space, functionality, and a more modern aesthetic to your bathroom. Whether you're a DIY enthusiast or prefer to hire a professional, this comprehensive guide will provide you with step-by-step instructions and expert tips.

Step 1: Planning and Preparation

Before you begin, gather the necessary tools and materials, including a new vanity, countertop, sink, faucet, drain assembly, and any decorative hardware. Measure the space where the new vanity will be installed to ensure a proper fit. Disconnect the water supply and drain lines from the old sink.

Step 2: Removing the Pedestal Sink

Unscrew the nuts securing the sink to the wall brackets. Carefully lift the sink off the pedestal and set it aside. Remove the pedestal by unscrewing the bolts or screws that attach it to the floor. If the pedestal is glued or caulked, use a pry bar or putty knife to gently break the bond.

Step 3: Installing the Vanity Base

Place the vanity base in the desired location and secure it to the wall studs using screws. Level the base using a level and adjust the legs or feet as needed. Connect the drain pipe from the vanity base to the drain line in the wall. Test the drainage by pouring water down the drain.

Step 4: Mounting the Vanity Top

Set the vanity top onto the vanity base, aligning it carefully. Secure the top to the base using the provided brackets or screws. Seal the joint between the countertop and the backsplash using caulk to prevent water damage.

Step 5: Installing the Sink

Position the sink in the cutout on the vanity top and align the drain hole with the drain assembly. Apply a bead of plumber's putty around the bottom rim of the sink and carefully set it into the opening. Tighten the mounting nuts or screws to secure the sink.

Step 6: Installing the Faucet

Insert the faucet into the pre-drilled holes on the countertop or sink. Connect the water supply lines to the faucet according to the manufacturer's instructions. Secure the faucet in place using the provided nuts and washers.

Step 7: Connecting the Water Supply

Reconnect the water supply lines to the faucet and turn on the water supply. Check for any leaks and tighten any loose connections as necessary. Connect the drain line from the vanity top to the drain line in the wall.

Step 8: Finishing Touches

Once the plumbing is complete, you can add decorative hardware such as drawer pulls or cabinet knobs. If desired, apply caulk around the edges of the vanity top to seal any gaps and give it a finished look.