How To Replace Bathroom Vanity Top

Replacing a bathroom vanity top is a relatively simple project that can be completed in a few hours. By following these instructions, you can easily update the look of your bathroom without breaking the bank.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

New vanity top
Vanity top adhesive
Caulk gun
Caulk
Screwdriver
Utility knife
Measuring tape
Level

Step 1: Remove the Old Vanity Top

Begin by removing the old vanity top. First, turn off the water supply to the sink and disconnect the plumbing. Then, remove the screws that are holding the vanity top in place. Carefully lift the vanity top off the vanity cabinet and set it aside.

Step 2: Clean the Vanity Cabinet

Once the old vanity top is removed, take some time to clean the vanity cabinet. Remove any dirt, dust, or debris. This will help to ensure that the new vanity top adheres properly.

Step 3: Apply Vanity Top Adhesive

Apply a thin layer of vanity top adhesive to the top of the vanity cabinet. Use a caulk gun to apply the adhesive evenly. Be sure to cover the entire surface of the cabinet.

Step 4: Position the New Vanity Top

Carefully lift the new vanity top and position it on the vanity cabinet. Center the vanity top and press it down firmly into place. Use a level to ensure that the vanity top is level.

Step 5: Secure the Vanity Top

Once the vanity top is in place, secure it with screws. Drive the screws through the vanity top and into the vanity cabinet. Be sure to tighten the screws securely.

Step 6: Caulk the Vanity Top

Apply a bead of caulk around the perimeter of the vanity top. Use a caulk gun to apply the caulk evenly. Be sure to fill in any gaps between the vanity top and the vanity cabinet. Smooth the caulk with your finger or a caulk finishing tool.

Step 7: Reconnect the Plumbing

Once the caulk has dried, reconnect the plumbing to the sink. Turn on the water supply and check for leaks. If there are no leaks, your new vanity top is now complete.