How To Replace A Vanity And Sink

How to Replace a Vanity and Sink

Replacing a vanity and sink can be a great way to update the look of your bathroom. It's a relatively simple project that can be completed in a weekend. Here's a step-by-step guide on how to do it:

Step 1: Gather your tools and materials

You'll need the following tools and materials to replace your vanity and sink:

New vanity
New sink
Faucet
P-trap
Supply lines
Screwdriver
Wrench
Putty knife
Caulk gun
Level

Step 2: Remove the old vanity and sink

Once you have all of your tools and materials, you can start by removing the old vanity and sink. To do this, you'll need to:

1. Turn off the water supply to the vanity and sink. 2. Disconnect the water supply lines from the faucet. 3. Disconnect the drain line from the sink. 4. Remove the screws that are holding the vanity to the wall. 5. Carefully lift the vanity off of the floor and set it aside. 6. Remove the old sink from the countertop.

Step 3: Install the new vanity

Once the old vanity and sink have been removed, you can start installing the new vanity. To do this, you'll need to:

1. Place the new vanity in the location where you want it to go. 2. Level the vanity using a level. 3. Secure the vanity to the wall using screws. 4. Connect the water supply lines to the faucet. 5. Connect the drain line to the sink.

Step 4: Install the new sink

Once the vanity is installed, you can install the new sink. To do this, you'll need to:

1. Apply a bead of caulk around the rim of the sink. 2. Place the sink in the opening in the countertop. 3. Tighten the nuts that hold the sink in place. 4. Connect the faucet to the sink.